Aravolta Logo

Infrastructure, Building, and Power Software for Data Centers

Every building, electrical, and compute asset monitored, controlled, and available via API. One platform. Deployed in days.

Request Demo
  • Automated onboarding
  • Any device, any vendor, any protocol
  • No per-point pricing
Cloud or On-Prem
API-First Platform
Works Alongside Existing Systems
Deploy in Days

Testimonials

Trusted by data center leaders

"This was by far the easiest setup and the most impressive monitoring system I've encountered. These guys actually deliver."

Dr. Martin Rapos
Dr. Martin Rapos
EVP, FLEXNODE
Case study →

"We went from manual tracking to real-time branch circuit and tenant-level visibility in weeks, not months."

Bryson Hopkins
Bryson Hopkins
VP Technology, Centra
Case study →

"What used to take an engineer three hours now happens in minutes. That's real time back for our team."

Scott Brookshire
Scott Brookshire
CTO, OpenColo
Case study →

"What impressed us most about Aravolta was their urgency and execution... deployed same day... worked around the clock until the job was done."

Carl Noriega
Carl Noriega
Managing Partner, Freedom Data Centers
Case study →

"Quick and efficient to bring online... unified building, electrical, and network management... flexible and customizable."

Michael McNamara
Michael McNamara
VP of Data Center Operations, 0.lat
Case study →

Join industry leaders using Aravolta

View all case studies
Aravolta Node - Virtual PLC hardware
Virtual PLC

One node to control every device in the building.

The Aravolta Node acts as a Virtual PLC to set up controls and automations across all building, electrical, and IT devices. Connect to any IT or OT device with no manual mapping or onboarding required.

Any IT or OT device

BMS, EPMS, DCIM, network gear, legacy serial, and modern APIs all on one node.

Zero manual mapping

Pre-built make/model templates with register maps, OIDs, scalars, and units already mapped.

Unlimited data points

We auto-pull every metric the device exposes. No per-point pricing, no metric cap.

48-hour onboarding SLA

Devices not yet in the library are mapped within 48 hours at no cost to the customer.

Bidirectional asset API

Read for monitoring, write for control workflows. All polling is read-only by default; control writes are gated, audited, and only enabled per device with explicit configuration. Every protocol runs out-of-band on the management network, so no traffic touches the production data plane.

Supported protocols, out-of-band

ModbusMeters, PDUs, RPPs
BACnetCRAH, chillers, CDUs
SNMPUPS, ATS, sensors
Redfish / IPMIServers & BMCs
MQTTIoT sensors
Wired I/ODry contacts, RS-485
↓ into your Aravolta node
AravoltaNode · in your facility
↓ one live feed
Your dashboards & tools
REST APIAlerts & control

Building / Electrical

Modbus TCP, BACnet/IP, OPC UA, SNMP, and many more

Compute / White Space

Redfish, IPMI, iDRAC, iLO, vendor BMC APIs, and many more

Network

SNMP, vendor CLIs, NetBox sync, and many more

Legacy / Serial

RS485, RS232, Digital I/O, and many more

3-5 separate vendors
One platform
BMS, EPMS, SCADA, NOC, and DCIM unified
Months of manual setup
Days to deploy
Auto-discovery with 42k+ device templates
Spreadsheet billing
Automated metering
Circuit-level accuracy, usage-based invoices via API
The Full Stack

Five systems. One login.

Most operators run separate tools for building management, power monitoring, SCADA, network operations, and asset tracking. Aravolta replaces all of them, or works alongside whichever ones you want to keep.

EPMS

Every watt, every breaker, every second. No MIB files. No Modbus register spreadsheets. Utility intake to rack outlet.

Learn more

BMS

Vendor-agnostic BMS that lives inside your DCIM. Chillers, CRACs, sensors, fire suppression. Not in a separate silo.

Learn more

SCADA

Monitoring and control from any browser. Start generators, adjust cooling setpoints, switch power paths. No proprietary hardware.

Learn more

NOC

24/7 availability without the 24/7 salaries. When they call you at 3 AM, they're reading from the same screen as you.

Learn more

DCIM

Auto-discovered assets, rack elevations, floor plans, capacity planning, and change management. No manual data entry.

Learn more

When a breaker trips, you see the thermal impact and the affected tenants in the same view. That only works when BMS, EPMS, and DCIM share one data model.

Integrations & Compatibility

SNMPv3 | Redfish | IPMI 2.0 | Modbus TCP/RTU | BACnet IP/MS-TP | OPC-UA | gNMI | CT Clamps | RS-485 | Analog 4-20mA

Integrations

Enterprise Integrations

Aravolta seamlessly connects to your existing enterprise systems. Push data to your platforms. Pull alerts and commands when you need them.

Data Platforms

SnowflakeKafkaAWS Kinesis

Ticketing

ServiceNowJiraPagerDuty

Communication

SlackEmailSMS

CRM & Billing

SalesforceCustom APIs

Hyperscaler Feeds

Direct StreamsCloud Tenants
Core Features

Data Centers are Built on Aravolta

Branch circuit monitoring, tenant billing, floor planning, and network management. The features that actually drive your daily operations.

Video poster
Most popular

Branch Circuit Monitoring

Branch circuit monitoring tracks every circuit in your data center with sub-second accuracy, enabling colocation operators to automate tenant power billing, detect overages instantly, and generate usage-based invoices without spreadsheets.

  • Real-time per-cabinet power tracking
  • Automatic overage detection & billing
  • Integrates with any tap box or meter
Learn more about branch circuit monitoring
Revenue generator

White-label customer portal with built-in tenant billing

Your tenants get a branded portal to view their own power usage, configure alerts, and submit service requests. Overage detection and usage-based invoicing happen automatically because the billing runs on the same data as your monitoring.

  • Deploy with your branding in days
  • Tenants self-serve instead of emailing your NOC
  • Integrated ticketing, smart hands, and cross-connects

Visual Floor Planning

See your entire facility at a glance. Color-coded cabinet availability, power utilization heatmaps, and drag-and-drop capacity planning.

  • Real-time cabinet availability visualization
  • Power & cooling capacity heatmaps
  • Plan deployments before they happen
Video poster
Network

Network Management & Monitoring

Visualize your entire network topology. Auto-discover switches, routers, and connections via agentless, out-of-band protocols. Map ports, VLANs, and trace cables in real-time. No software agents required on equipment.

  • Auto-discovered network topology mapping
  • VLAN management & port mapping
  • Cable documentation & path tracing
Learn more about network management
Connect to Anything

Any device. Any vendor. Any protocol.

25,000+ pre-built device templates. If your device isn't in our library, we onboard it automatically. Private vendor, custom hardware, legacy equipment. If it has an IP address or a serial port, we connect to it.

Network Protocols

  • SNMPv3
  • Redfish / IPMI 2.0
  • Modbus TCP/RTU
  • BACnet IP / MS-TP
  • OPC-UA
  • gNMI

Hardware Connections

  • CT Clamps (current transformers)
  • Modbus Serial (RS-485 / RS-232)
  • Form C Dry Contacts
  • RJ45
  • 4-20 mA / 0-10 V / 0-5 V analog inputs
  • Temperature & humidity probes

API & Integration

  • REST API (full OpenAPI spec)
  • Webhooks for real-time events
  • Tenant billing API
  • PagerDuty, Slack, email, SMS
  • Custom integrations on request
  • New device types onboarded in 48 hours
How It Works

Four steps to production monitoring

Aravolta uses a patent-pending auto-discovery engine to configure your entire data center. No manual data entry required.

1

Network Discovery

Aravolta scans your network via SNMPv3, Redfish, and IPMI to auto-discover every device, PDU, and sensor.

Typical time: 2-4 hours | Prerequisites: Network access, device credentials

2

Auto-Configuration

Devices are classified, mapped to racks and rows, and monitoring templates are applied automatically.

Typical time: 4-8 hours | Handles up to 10,000+ devices

3

Validation & Tuning

Review discovered assets, configure alert thresholds, set up user roles, and verify data accuracy with your team.

Typical time: 4-8 hours | Guided by Aravolta engineers

4

Go Live

Dashboards, alerts, billing exports, and customer portals are live. Deliverables: real-time monitoring, alert policies, and exportable reports.

Typical time: 2-4 hours | Full production within 48 hours

Comparison

Aravolta vs. the legacy stack

What you get with one platform vs. buying separate DCIM, BMS, EPMS, SCADA, and NOC tools.

CapabilityAravoltaLegacy DCIMLegacy BMSLegacy EPMS
Asset managementAuto-discoveredManual entryNoNo
Power meteringBuilt-in, any vendorSNMP onlyNoVendor-locked
Cooling / BMSBuilt-in, any vendorNoVendor-lockedNo
SCADAWeb-nativeNoProprietary HMINo
24/7 NOCBuilt-inNoNoNo
Tenant billingAutomated via APINoNoManual export
DeploymentDaysMonthsMonthsMonths
Legacy DCIM: Nlyte, Sunbird. Legacy BMS: Schneider, Honeywell, Johnson Controls. Legacy EPMS: Schneider PowerLogic, Eaton.

Aravolta works alongside your existing systems. Keep your Schneider BMS or Eaton EPMS running while Aravolta pulls their data into one view. Replace them one at a time, or never. Your call.

Detailed comparisons:vs. Nlytevs. SunbirdFull DCIM comparison
Success Stories

Trusted by data centers worldwide

See how leading operators are running their infrastructure with Aravolta.

View all case studies
FAQ

Frequently asked questions

What is Aravolta?
Aravolta is a unified BMS, EPMS, SCADA, NOC, and DCIM platform for data centers. It monitors and controls power, cooling, network, and assets from a single login. The platform connects to any device, any vendor, and any protocol. It deploys in days using auto-discovery with 42k+ device templates, and works alongside your existing systems or replaces them entirely.
Can I use Aravolta for just one system like EPMS without replacing my existing BMS?
Yes. Aravolta is modular. You can deploy just the EPMS module and keep your existing BMS, or run just the NOC and DCIM while your Schneider or Honeywell BMS stays in place. Aravolta pulls data from your existing tools into one view. Replace systems one at a time, or never. Your call.
How long does deployment take?
Days, not months. Aravolta uses a patent-pending auto-discovery engine that scans your network via SNMPv3, Redfish, and IPMI to find every device, PDU, and sensor. Devices are auto-classified, mapped to racks and rows, and monitoring templates from a library of 25,000+ are applied automatically. No manual register mapping or MIB file configuration required.
What hardware and protocols does Aravolta support?
Aravolta supports SNMPv3, Redfish, IPMI 2.0, Modbus TCP/RTU, BACnet IP/MS-TP, OPC-UA, and gNMI. It works with hardware from Cisco, Dell, HP, Intel, Lenovo, Schneider Electric, Supermicro, and any other vendor. For non-networked equipment, we support CT clamps, RS-485, analog 4-20mA inputs, and dry contacts. If a device type is not in our library, we have a 48-hour SLA to onboard it.
Does Aravolta replace my existing BMS or EPMS?
It can, but it does not have to. Aravolta works alongside your existing Schneider, Honeywell, Siemens, or Johnson Controls systems. It pulls data from them via BACnet, Modbus, and SNMP into one unified view. Many operators start by layering Aravolta on top of their existing stack and replace individual systems over time as contracts expire.
Does Aravolta handle tenant power billing?
Yes. Aravolta monitors power at the branch circuit level and maps consumption directly to tenants. Overage detection is automatic. Usage-based invoices are generated via API and can be exported to your billing system. Tenants can also view their own data through a white-label customer portal.
What is the difference between Aravolta and traditional DCIM like Nlyte or Sunbird?
Traditional DCIM tools like Nlyte and Sunbird focus on asset tracking and capacity planning. They do not include BMS, EPMS, SCADA, or NOC capabilities. With those tools, you still need separate vendors for power metering, cooling monitoring, and 24/7 operations. Aravolta combines all five systems into one platform with automated device discovery and deploys in days instead of months.
Is Aravolta cloud-hosted or on-premises?
Both options are available. Aravolta offers cloud-hosted deployments for faster setup and managed infrastructure, and on-premises installations for operators with data sovereignty or air-gapped network requirements. The platform works the same way in both configurations.
Can Aravolta be deployed on-premises?
Yes. Aravolta supports cloud, on-premises, and hybrid deployments. For air-gapped or security-sensitive environments, the platform runs entirely on-site with a local time-series database. Periodic maintenance access can be coordinated via secure tunnel (Tailscale or customer-preferred VPN). The agentless, out-of-band architecture means no software agents are installed on your equipment. Monitoring happens over the network without touching production workloads.
What security certifications does Aravolta have?
Aravolta is SOC 2 Type I and Type II certified, ISO 27001 compliant, and HIPAA compliant. The platform uses end-to-end encryption for data in transit and at rest, role-based access controls, and maintains audit trails for all infrastructure changes and control actions.
I have a brownfield facility with non-smart PDUs and legacy equipment. Can I still use Aravolta?
Yes. Aravolta was built for exactly this scenario. For non-smart PDUs, we attach to your existing CT clamps or ship our own (Rogowski coils or split-core clamps) for per-circuit metering without replacing hardware. For legacy equipment without network connectivity, our node acts as a gateway with built-in serial (RS-485/RS-232), analog inputs (4-20mA, 0-10V), and dry contact connections. You do not need to buy a separate gateway or replace your existing equipment.
What equipment does Aravolta monitor?
Aravolta monitors UPS systems (Schneider, Eaton, Vertiv), generators (Caterpillar, Cummins, Kohler), PDUs (Raritan, Server Technology, Geist, CyberPower), switchgear (ABB, Siemens, GE), CRAC/CRAH units (Vertiv Liebert, Stulz, Trane), chillers (Johnson Controls, Carrier, Daikin), in-row and liquid cooling (CoolIT, GRC), network switches (Cisco, Arista, Juniper), fire detection (Honeywell, Notifier, Xtralis VESDA), access control, and servers from Dell, HPE, Supermicro, and Lenovo. If your equipment is not on this list, we onboard new device types within 48 hours.
Does Aravolta support multi-site management?
Yes. Manage all your facilities from one interface. Centralized alarms, site-by-site performance comparison, and a single historian across all locations. Same dashboard whether you have 2 sites or 200. Role-based access controls let you restrict visibility per facility.
Can Aravolta control equipment or just monitor it?
Both. Aravolta SCADA provides remote control capabilities from any browser. Start and stop generators, adjust cooling setpoints, switch power paths, and toggle individual PDU outlets. All control actions are logged with timestamps, user identity, and before/after values. Role-based access ensures only authorized operators can execute control commands.
Does Aravolta provide a customer portal for tenants?
Yes. Aravolta includes a white-label customer portal that you deploy with your own branding. Tenants can view their power consumption, configure alerts, submit service requests, and manage cross-connects. Overage notifications and usage-based billing are built in.
What does Aravolta cost?
Aravolta uses transparent per-device pricing with no per-point fees. Every metric your equipment reports is included at no extra cost. No mandatory professional services. Contact us for a quote based on your facility size and device count.
How do I get started?
Schedule a demo. We will walk you through the platform with your specific facility in mind, covering your device mix, protocol requirements, and deployment timeline. From contract to production monitoring typically takes days, not weeks.

What is Aravolta?

Aravolta is a modern Data Center Infrastructure Management (DCIM) platform that unifies branch circuit monitoring, power monitoring, building management, network operations, and asset tracking into a single pane of glass. Built for colocations, enterprise data centers, and lenders, Aravolta deploys in under 48 hours using a patent-pending auto-discovery engine. The platform is SOC 2 Type II certified and uses transparent per-device pricing.

Deployment
<48 hours
Security
SOC 2 Type II
Protocols
SNMP, Redfish, IPMI, Modbus, BACnet
Pricing
Per-device, transparent

Last updated: March 2026

Ready to modernize your data center?

Join leading data centers already using Aravolta. Deploy in days, not months. No rip-and-replace required.

Request Demo
  • SOC 2 Type II
  • 99.99% Uptime
  • <48hr Deploy
  • 24/7 Support